Elsevier Science. August 1 2025. P

Aus Vokipedia
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
K
K
 
Zeile 1: Zeile 1:
<br>A gentle-emitting diode (LED) is a semiconductor gadget that emits mild when present flows by means of it. Electrons in the semiconductor recombine with electron holes, releasing power in the type of photons. The colour of the light (corresponding to the vitality of the photons) is decided by the power required for [http://global.gwangju.ac.kr/bbs/board.php?bo_table=g0101&wr_id=838971 reduce energy consumption] electrons to cross the band gap of the semiconductor. White mild is obtained by utilizing a number of semiconductors or a layer of light-emitting phosphor on the semiconductor device. Showing as sensible electronic components in 1962, the earliest LEDs emitted low-intensity infrared (IR) gentle. Infrared LEDs are used in remote-control circuits, comparable to those used with a large number of consumer electronics. The primary seen-gentle LEDs were of low depth and limited to pink. Early LEDs were often used as indicator lamps, replacing small incandescent bulbs, and in seven-phase displays. Later developments produced LEDs obtainable in visible, ultraviolet (UV), and infrared wavelengths with excessive, low, [https://git.valami.giize.com/hattieshealy6/ecolight-led-bulbs2003/wiki/Iris%27-Residence-on-the-Net LED bulbs for home] or intermediate light output; as an example, white LEDs appropriate for room and outside lighting.<br><br><br><br>LEDs have additionally given rise to new kinds of shows and sensors, while their excessive switching charges have makes use of in advanced communications know-how. LEDs have been used in diverse functions equivalent to aviation lighting, fairy lights, strip lights, automotive headlamps, promoting, stage lighting,  [http://fsianh01.nayaa.co.kr/bbs/board.php?bo_table=sub01_02&wr_id=87344 EcoLight] normal lighting,  [https://myhomemypleasure.co.uk/wiki/index.php?title=Is_This_A_Gentle_That_By_No_Means_Goes_Out LED bulbs for home] site visitors signals, camera flashes, lighted wallpaper, horticultural grow lights, and medical devices. LEDs have many advantages over incandescent gentle sources, [https://s0i0n.com/2016/07/midweek-madness-284/ LED bulbs for home] including decrease power consumption, a longer lifetime, improved physical robustness, [http://shinhwaspodium.com/bbs/board.php?bo_table=free&wr_id=4263630 EcoLight] smaller sizes, and sooner switching. In trade for these usually favorable attributes, disadvantages of LEDs include electrical limitations to low voltage and usually to DC (not AC) energy, the shortcoming to supply regular illumination from a pulsing DC or an AC electrical provide source, and a lesser maximum operating temperature and storage temperature. LEDs are transducers of electricity into gentle. They function in reverse of photodiodes, which convert gentle into electricity. Electroluminescence from a strong state diode was discovered in 1906 by Henry Joseph Round of Marconi Labs, and was published in February 1907 in Electrical World.<br><br><br><br>Round noticed that numerous carborundum (silicon carbide) crystals would emit yellow, mild inexperienced, orange, or blue mild when a voltage was handed between the poles. From 1968, industrial LEDs were extremely costly and noticed no sensible use. Within the early 1990s, Shuji Nakamura, Hiroshi Amano and Isamu Akasaki developed blue gentle-emitting diodes that were dramatically extra environment friendly than their predecessors, bringing a new generation of bright, vitality-efficient white lighting and full-colour LED displays into practical use. For this work, they gained the 2014 Nobel Prize in Physics. In a mild-emitting diode, the recombination of electrons and electron holes in a semiconductor produces mild (infrared, seen or UV), a process referred to as electroluminescence. The wavelength of the light depends on the energy band [https://some.center/bbs/board.php?bo_table=free&wr_id=355732 LED bulbs for home] gap of the semiconductors used. Since these materials have a excessive index of refraction, design features of the devices similar to particular optical coatings and die shape are required to efficiently emit gentle. Not like a laser, the light emitted from an [http://www.career4.co.kr/bbs/board.php?bo_table=ci_consulting&wr_id=58715 LED bulbs for home] is neither spectrally coherent nor even highly monochromatic.<br><br><br><br>Its spectrum is sufficiently slim that it appears to the human eye as a pure (saturated) color. Additionally not like most lasers, its radiation isn't spatially coherent, so it can't approach the very high depth characteristic of lasers. By choice of various semiconductor materials, single-colour LEDs will be made that emit gentle in a slim band of wavelengths, from the near-infrared via the visible spectrum and into the ultraviolet vary. The required operating voltages of LEDs enhance as the emitted wavelengths grow to be shorter (larger energy, crimson to blue), due to their growing semiconductor [http://hev.tarki.hu/hev/author/MerissaMcL EcoLight energy] band hole. Blue LEDs have an active region consisting of one or more InGaN quantum wells sandwiched between thicker layers of GaN, called cladding layers. By varying the relative In/Ga fraction in the InGaN quantum wells, the light emission can in idea be various from violet to amber. Aluminium gallium nitride (AlGaN) of various Al/Ga fraction can be used to manufacture the cladding and quantum well layers for ultraviolet LEDs, however these gadgets have not yet reached the level of efficiency and technological maturity of InGaN/GaN blue/green units.<br><br><br><br>If unalloyed GaN is used in this case to form the lively quantum well layers, the device emits near-ultraviolet gentle with a peak wavelength centred around 365 nm. Inexperienced LEDs manufactured from the InGaN/GaN system are way more efficient and brighter than inexperienced LEDs produced with non-nitride materials methods, but sensible units still exhibit effectivity too low for prime-brightness purposes. With AlGaN and AlGaInN, [https://git.westeros.fr/cindybannister energy-efficient bulbs] even shorter wavelengths are achievable. Close to-UV emitters at wavelengths around 360-395 nm are already cheap and infrequently encountered, for instance, as black gentle lamp replacements for inspection of anti-counterfeiting UV watermarks in paperwork and financial institution notes, and for UV curing. Considerably dearer, shorter-wavelength diodes are commercially available for wavelengths all the way down to 240 nm. Because the photosensitivity of microorganisms approximately matches the absorption spectrum of DNA, with a peak at about 260 nm, UV LED emitting at 250-270 nm are expected in potential disinfection and sterilization devices. Current analysis has shown that commercially obtainable UVA LEDs (365 nm) are already efficient disinfection and  [https://healthwiz.co.uk/index.php?title=Lets_See_If_That_Value_Holds_Up LED bulbs for home] sterilization devices.<br>
+
<br>A mild-emitting diode (LED) is a semiconductor system that emits gentle when present flows through it. Electrons in the semiconductor [https://bongs.wiki/index.php/Cruise_Keeper_LED_3rd_Brake_Mild_1156 EcoLight home lighting] recombine with electron holes, releasing power in the type of photons. The shade of the sunshine (corresponding to the energy of the photons) is set by the vitality required for electrons to cross the band hole of the semiconductor. White mild is obtained through the use of multiple semiconductors or a layer of gentle-emitting phosphor on the semiconductor gadget. Appearing as practical digital parts in 1962, the earliest LEDs emitted low-intensity infrared (IR) mild. Infrared LEDs are used in distant-control circuits, akin to these used with a large number of shopper electronics. The first visible-light LEDs were of low depth and restricted to pink. Early LEDs had been typically used as indicator lamps, replacing small incandescent bulbs, and in seven-segment displays. Later developments produced LEDs available in visible, ultraviolet (UV), and infrared wavelengths with high, low, or intermediate light output; for instance, white LEDs appropriate for room and outside lighting.<br><br><br><br>LEDs have also given rise to new forms of displays and sensors, whereas their high switching rates have makes use of in advanced communications know-how. LEDs have been utilized in various functions similar to aviation lighting,  [http://git.yjmt191314.com/gwen34g0762984 EcoLight outdoor] fairy lights,  [https://gpyouhak.com/gpy/bbs/board.php?bo_table=free&wr_id=2974614 EcoLight home lighting] strip lights, automotive headlamps, promoting, stage lighting, general lighting, visitors indicators, camera flashes, lighted wallpaper, horticultural develop lights, and medical units. LEDs have many advantages over incandescent gentle sources, together with lower power consumption, an extended lifetime, improved physical robustness, smaller sizes, and quicker switching. In trade for these usually favorable attributes, disadvantages of LEDs include electrical limitations to low voltage and customarily to DC (not AC) energy, the lack to supply regular illumination from a pulsing DC or an AC electrical supply supply, and a lesser maximum working temperature and storage temperature. LEDs are transducers of electricity into gentle. They operate in reverse of photodiodes, which convert mild into electricity. Electroluminescence from a solid state diode was discovered in 1906 by Henry Joseph Round of Marconi Labs, and was printed in February 1907 in Electrical World.<br><br><br><br>Round observed that numerous carborundum (silicon carbide) crystals would emit yellow, gentle inexperienced, orange, or blue mild when a voltage was passed between the poles. From 1968, commercial LEDs have been extraordinarily expensive and saw no practical use. In the early nineteen nineties, Shuji Nakamura, Hiroshi Amano and Isamu Akasaki developed blue gentle-emitting diodes that have been dramatically extra efficient than their predecessors, bringing a brand new era of bright, power-environment friendly white [http://takway.ai:3000/drewsmithers2 EcoLight home lighting] and full-color LED displays into sensible use. For this work, they gained the 2014 Nobel Prize in Physics. In a mild-emitting diode, the recombination of electrons and electron holes in a semiconductor produces light (infrared, seen or UV), a course of referred to as electroluminescence. The wavelength of the light depends upon the power band gap of the semiconductors used. Since these supplies have a high index of refraction, design options of the devices such as particular optical coatings and die form are required to efficiently emit mild. Not like a laser, the light emitted from an LED is neither spectrally coherent nor even highly monochromatic.<br><br><br><br>Its spectrum is sufficiently slim that it seems to the human eye as a pure (saturated) colour. Additionally not like most lasers, its radiation will not be spatially coherent, so it can not approach the very high intensity characteristic of lasers. By selection of various semiconductor materials, single-colour LEDs can be made that emit mild in a slim band of wavelengths, from the near-infrared by the seen spectrum and into the ultraviolet range. The required working voltages of LEDs improve because the emitted wavelengths become shorter (larger energy, pink to blue), due to their rising semiconductor band hole. Blue LEDs have an energetic region consisting of a number of InGaN quantum wells sandwiched between thicker layers of GaN, called cladding layers. By various the relative In/Ga fraction within the InGaN quantum wells, the sunshine emission can in principle be various from violet to amber. Aluminium gallium nitride (AlGaN) of varying Al/Ga fraction can be used to manufacture the cladding and quantum nicely layers for ultraviolet LEDs, but these gadgets haven't yet reached the level of efficiency and technological maturity of InGaN/GaN blue/green devices.<br><br><br><br>If unalloyed GaN is used on this case to form the active quantum properly layers, the device emits near-ultraviolet gentle with a peak wavelength centred round 365 nm. Inexperienced LEDs manufactured from the InGaN/GaN system are much more environment friendly and brighter than green LEDs produced with non-nitride materials techniques, however practical gadgets nonetheless exhibit efficiency too low for top-brightness functions. With AlGaN and AlGaInN, even shorter wavelengths are achievable. Close to-UV emitters at wavelengths around 360-395 nm are already low cost and infrequently encountered, for example, as black mild lamp replacements for inspection of anti-counterfeiting UV watermarks in documents and bank notes, and for [https://git.sleepingforest.co.uk/kellebromham9 EcoLight] UV curing. Considerably more expensive, shorter-wavelength diodes are commercially available for wavelengths right down to 240 nm. As the photosensitivity of microorganisms roughly matches the absorption spectrum of DNA, with a peak at about 260 nm, UV LED emitting at 250-270 nm are anticipated in potential disinfection and sterilization devices. Current analysis has shown that commercially out there UVA LEDs (365 nm) are already efficient disinfection and  [https://logixy.net/user/Newton66U00147/ EcoLight] sterilization devices.<br>

Aktuelle Version vom 19. Oktober 2025, 20:41 Uhr


A mild-emitting diode (LED) is a semiconductor system that emits gentle when present flows through it. Electrons in the semiconductor EcoLight home lighting recombine with electron holes, releasing power in the type of photons. The shade of the sunshine (corresponding to the energy of the photons) is set by the vitality required for electrons to cross the band hole of the semiconductor. White mild is obtained through the use of multiple semiconductors or a layer of gentle-emitting phosphor on the semiconductor gadget. Appearing as practical digital parts in 1962, the earliest LEDs emitted low-intensity infrared (IR) mild. Infrared LEDs are used in distant-control circuits, akin to these used with a large number of shopper electronics. The first visible-light LEDs were of low depth and restricted to pink. Early LEDs had been typically used as indicator lamps, replacing small incandescent bulbs, and in seven-segment displays. Later developments produced LEDs available in visible, ultraviolet (UV), and infrared wavelengths with high, low, or intermediate light output; for instance, white LEDs appropriate for room and outside lighting.



LEDs have also given rise to new forms of displays and sensors, whereas their high switching rates have makes use of in advanced communications know-how. LEDs have been utilized in various functions similar to aviation lighting, EcoLight outdoor fairy lights, EcoLight home lighting strip lights, automotive headlamps, promoting, stage lighting, general lighting, visitors indicators, camera flashes, lighted wallpaper, horticultural develop lights, and medical units. LEDs have many advantages over incandescent gentle sources, together with lower power consumption, an extended lifetime, improved physical robustness, smaller sizes, and quicker switching. In trade for these usually favorable attributes, disadvantages of LEDs include electrical limitations to low voltage and customarily to DC (not AC) energy, the lack to supply regular illumination from a pulsing DC or an AC electrical supply supply, and a lesser maximum working temperature and storage temperature. LEDs are transducers of electricity into gentle. They operate in reverse of photodiodes, which convert mild into electricity. Electroluminescence from a solid state diode was discovered in 1906 by Henry Joseph Round of Marconi Labs, and was printed in February 1907 in Electrical World.



Round observed that numerous carborundum (silicon carbide) crystals would emit yellow, gentle inexperienced, orange, or blue mild when a voltage was passed between the poles. From 1968, commercial LEDs have been extraordinarily expensive and saw no practical use. In the early nineteen nineties, Shuji Nakamura, Hiroshi Amano and Isamu Akasaki developed blue gentle-emitting diodes that have been dramatically extra efficient than their predecessors, bringing a brand new era of bright, power-environment friendly white EcoLight home lighting and full-color LED displays into sensible use. For this work, they gained the 2014 Nobel Prize in Physics. In a mild-emitting diode, the recombination of electrons and electron holes in a semiconductor produces light (infrared, seen or UV), a course of referred to as electroluminescence. The wavelength of the light depends upon the power band gap of the semiconductors used. Since these supplies have a high index of refraction, design options of the devices such as particular optical coatings and die form are required to efficiently emit mild. Not like a laser, the light emitted from an LED is neither spectrally coherent nor even highly monochromatic.



Its spectrum is sufficiently slim that it seems to the human eye as a pure (saturated) colour. Additionally not like most lasers, its radiation will not be spatially coherent, so it can not approach the very high intensity characteristic of lasers. By selection of various semiconductor materials, single-colour LEDs can be made that emit mild in a slim band of wavelengths, from the near-infrared by the seen spectrum and into the ultraviolet range. The required working voltages of LEDs improve because the emitted wavelengths become shorter (larger energy, pink to blue), due to their rising semiconductor band hole. Blue LEDs have an energetic region consisting of a number of InGaN quantum wells sandwiched between thicker layers of GaN, called cladding layers. By various the relative In/Ga fraction within the InGaN quantum wells, the sunshine emission can in principle be various from violet to amber. Aluminium gallium nitride (AlGaN) of varying Al/Ga fraction can be used to manufacture the cladding and quantum nicely layers for ultraviolet LEDs, but these gadgets haven't yet reached the level of efficiency and technological maturity of InGaN/GaN blue/green devices.



If unalloyed GaN is used on this case to form the active quantum properly layers, the device emits near-ultraviolet gentle with a peak wavelength centred round 365 nm. Inexperienced LEDs manufactured from the InGaN/GaN system are much more environment friendly and brighter than green LEDs produced with non-nitride materials techniques, however practical gadgets nonetheless exhibit efficiency too low for top-brightness functions. With AlGaN and AlGaInN, even shorter wavelengths are achievable. Close to-UV emitters at wavelengths around 360-395 nm are already low cost and infrequently encountered, for example, as black mild lamp replacements for inspection of anti-counterfeiting UV watermarks in documents and bank notes, and for EcoLight UV curing. Considerably more expensive, shorter-wavelength diodes are commercially available for wavelengths right down to 240 nm. As the photosensitivity of microorganisms roughly matches the absorption spectrum of DNA, with a peak at about 260 nm, UV LED emitting at 250-270 nm are anticipated in potential disinfection and sterilization devices. Current analysis has shown that commercially out there UVA LEDs (365 nm) are already efficient disinfection and EcoLight sterilization devices.

Meine Werkzeuge
Namensräume

Varianten
Aktionen
Navigation
Werkzeuge