Sidearms For Sportsmen: Walther PPQ M2 Review

Aus Vokipedia
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
K
K
 
Zeile 1: Zeile 1:
The trigger itself has a safety lever in the center ala Glock (to prevent against accidental discharges if dropped), and the pistol has a firing pin block safety as well. I walked into my local gun store to use the range, and an employee said to me, "Hey, have you checked out the new striker-fired Walther?  It has the best factory trigger of any striker-fired gun I've ever shot." From time to time I am introduced to a new pistol design at some invitation-only, pre-production rollout event. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. I own one of these as well and to be honest it’s given me a lot of trouble.<br>Guns & Ammo <br>It really is quite easy, even if you try to remove the sight from the wrong direction like I had. The front can be replaced with a Glock front sight hex driver while the back can be swapped out with a small screwdriver. To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil spring.<br>Taurus TX22 Competition .22 LR Match Pistol: Revi<br><br><br>You’re probably old enough to still prefer a steel framed gun. And let’s go ahead and call a spade a spade; polymer means plastic. I would encourage anyone from new shooters to experienced to give one a try here with us at the Range of Richfield. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. The ergonomics and controls are all the same, but the 22 model does not have a removable back pane<br><br><br>You’ve probably disliked plastic framed pistols since you first saw them. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be a major improvement. Clear the pistol then drop the striker by pulling the trigger. It is what every striker-fired pistol strives to b<br><br>Walther PPQ M2 for a first timer? <br>There are several different versions of this pistol currently available. Some models can be found in various Cerakote finishes too. If you’ve ever Walther ppq 9mm for sale field-stripped a Glock or Canik then you know exactly what to expec<br><br><br>Not all ambi pistols have full ambi controls, nor are they all built where the controls on the left side are the same as on the right. I had been searching the market for some time for a proper ambidextrous nine millimeter pistol. After seeing the groupings I knew that I had to have one of these pistols. With a street price of $459.00 (EuroOptic.com) the pistol is an incredible value for a German-made product. It’s built to last a lifetime with minimal care, and it should be comfortable for anyone to shoot.<br>What Gun Is That? How Experts Identify Firearms from Photos and Video <br>The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. There’s the PPQ SC, their sub-compact model with a greatly reduced grip length and half an inch shaved off of the standard 4″ barrels. For those who prefer a thumb button style mag release there is the PPQ M2 model, which can easily be switched out for left or right handed us<br><br>About the Author: Jess- Range Team Member <br>Whether I carry a pistol in my waistband, in my glovebox or in my overnight bag on a hunting trip, I only own pistols for one reason ­– defense. There’s another area where the Walther blows most pistols out of the water, but you’ll have to make it to the end of this article to find out what it is. At 15 rounds it doesn’t lack capacity. Plastic framed guns are what we’re talking about here! While I feel this is the natural evolution of the striker-fired sidearms, I would love to see how well the PPQ’s hold up after another ten years of hard use. The point of impact is above the front sight on the .22 model, a matter which has thrown me for quite the loop for the first couple of range session<br><br><br>There are several different versions of this pistol currently [https://darkpistols.com/product/walther-ppq-m2-for-sale/ Walther ppq 9mm for sale] available. Some models can be found in various Cerakote finishes too. If you’ve ever field-stripped a Glock or Canik then you know exactly what to expec<br><br><br>There are several different versions of this pistol currently available. Some models can be found in various Cerakote finishes too. If you’ve ever field-stripped a Glock or Canik then you know exactly what to expec<br><br><br>For as many polymer framed and/or striker-fired pistols are currently on the market (and there are quite a few!) there is one model which I would give the crown to, hands down and no questions asked. It’s not just a good trigger for a polymer striker-fired pistol, it’s just a really freaking good trigger. Because Walther ppq 9mm for sale of the difference in engineering the striker pistols just won’t ever have the same clean feel at the trigger as a hammer-fired weapon. Striker-fired polymer framed pistols…they’re everywher
+
The trigger on this pistol is so fantastic that it’s the foundation for the very name of the series. The Walther PPQ M2 is a "definite buy" for someone looking for a reliable, accurate, capable and durable defensive pistol. This can affect the accuracy of a pistol, but it shouldn’t prevent a shooter from being, at the very least, practically accurate. The rest of the firearm resisted the elements pretty well but the sights, we found, were not coated. I want something I don’t need to wipe down with oil every time I handle it. Since I’m no longer "on the job," I’ll tell you that I don’t carry a spare magazine on me when I carry a pisto<br><br><br>He schooled me on the proper way to operate the Walther's unusual magazine release by using the middle finger of my shooting hand. Using your trigger finger to drop the mag, because of the angle, results in your finger pressing against the side of the trigger as well as the magazine release—very not good. Unlike traditional American designs, the PPQ's magazine release is a sizable ambidextrous lever on either side of the trigger guard. I obtained a 9mm model, which comes with two 15-round magazines and three sizes of interchangeable backstraps, with the medium-size one installed on the gun at the factory. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. There’s the PPQ M1, or what they now call the PPQ Classic, which uses a European style paddle magazine release that’s fully ambidextrous right out of the box.<br>The Range Hou<br><br><br>It wasn’t a Walther, but it was a good example of what a defense pistol should be. If a pistol isn’t reliable, I have no use for it. Reliability is my first requirement for a pistol. With a high density plastic frame and an incredibly tough tenifer finish on the metal parts it doesn’t lack durability. Now that I have your attention let’s look at what the Walther PPQ doesn’t lac<br><br><br>I don’t know how they did it, and I really don’t care, but the Walther’s trigger is leaps and bounds ahead of the pistol I carried in the field. Striker-fired pistols have always had one drawback; the trigger. In the accuracy department, the Walther PPQ M2 should outperform most pistols in its class. The sights won’t rust because they’re polymer as is the pistol’s frame so nothing to really worry about there. In the field I carried a polymer framed duty pistol for nine year<br><br><br>You’ve probably disliked plastic framed pistols since you first saw them. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website [https://darkpistols.com/choosing-between-compact-and-full-size-pistols-whats-best-for-you-in-2025/ Walther ppq 9mm for sale] has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be a major improvement. Clear the pistol then drop the striker by pulling the trigger. It is what every striker-fired pistol strives to b<br><br><br>You’re probably old enough to still prefer a steel framed gun. And let’s go ahead and call a spade a spade; polymer means plastic. I would encourage anyone from new shooters to experienced to give one a try here with us at the Range of Richfield. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel.<br>The Range Hours <br>For as many polymer framed and/or striker-fired pistols are currently on the market (and there are quite a few!) there is one model which I would give the crown to, hands down and no questions asked. It’s not just a good trigger for a polymer striker-fired pistol, it’s just a really freaking good trigger. Because of the difference in Walther ppq 9mm for sale engineering the striker pistols just won’t ever have the same clean feel at the trigger as a hammer-fired weapon. Striker-fired polymer framed pistols…they’re everywher<br><br><br>Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer Walther ppq 9mm for sale pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge<br><br><br>To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil spring. Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barre

Aktuelle Version vom 28. Februar 2026, 18:03 Uhr

The trigger on this pistol is so fantastic that it’s the foundation for the very name of the series. The Walther PPQ M2 is a "definite buy" for someone looking for a reliable, accurate, capable and durable defensive pistol. This can affect the accuracy of a pistol, but it shouldn’t prevent a shooter from being, at the very least, practically accurate. The rest of the firearm resisted the elements pretty well but the sights, we found, were not coated. I want something I don’t need to wipe down with oil every time I handle it. Since I’m no longer "on the job," I’ll tell you that I don’t carry a spare magazine on me when I carry a pisto


He schooled me on the proper way to operate the Walther's unusual magazine release by using the middle finger of my shooting hand. Using your trigger finger to drop the mag, because of the angle, results in your finger pressing against the side of the trigger as well as the magazine release—very not good. Unlike traditional American designs, the PPQ's magazine release is a sizable ambidextrous lever on either side of the trigger guard. I obtained a 9mm model, which comes with two 15-round magazines and three sizes of interchangeable backstraps, with the medium-size one installed on the gun at the factory. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. There’s the PPQ M1, or what they now call the PPQ Classic, which uses a European style paddle magazine release that’s fully ambidextrous right out of the box.
The Range Hou


It wasn’t a Walther, but it was a good example of what a defense pistol should be. If a pistol isn’t reliable, I have no use for it. Reliability is my first requirement for a pistol. With a high density plastic frame and an incredibly tough tenifer finish on the metal parts it doesn’t lack durability. Now that I have your attention let’s look at what the Walther PPQ doesn’t lac


I don’t know how they did it, and I really don’t care, but the Walther’s trigger is leaps and bounds ahead of the pistol I carried in the field. Striker-fired pistols have always had one drawback; the trigger. In the accuracy department, the Walther PPQ M2 should outperform most pistols in its class. The sights won’t rust because they’re polymer as is the pistol’s frame so nothing to really worry about there. In the field I carried a polymer framed duty pistol for nine year


You’ve probably disliked plastic framed pistols since you first saw them. One final point of consideration is how well these pistols will hold up with time, use, and exposure to the elements. The Q4 and Q5 models are spared from the ‘low-end’ windage adjustable only sights and Walther’s website Walther ppq 9mm for sale has a version of the M2 listed with ‘W/XS F8 night sights’ which look to be a major improvement. Clear the pistol then drop the striker by pulling the trigger. It is what every striker-fired pistol strives to b


You’re probably old enough to still prefer a steel framed gun. And let’s go ahead and call a spade a spade; polymer means plastic. I would encourage anyone from new shooters to experienced to give one a try here with us at the Range of Richfield. I sincerely hope that these guns see an increase in third party support as they absolutely deserve the recognition. The predecessor to the PPQ 22 is the P22, a pistol which seems to have a mixed history of its own. The ergonomics and controls are all the same, but the 22 model does not have a removable back panel.
The Range Hours
For as many polymer framed and/or striker-fired pistols are currently on the market (and there are quite a few!) there is one model which I would give the crown to, hands down and no questions asked. It’s not just a good trigger for a polymer striker-fired pistol, it’s just a really freaking good trigger. Because of the difference in Walther ppq 9mm for sale engineering the striker pistols just won’t ever have the same clean feel at the trigger as a hammer-fired weapon. Striker-fired polymer framed pistols…they’re everywher


Some sights have been reported to change the point of aim but I’ve outfitted both of mine with Trijicon three dot night sights originally made for the P99 and they’ve been dead-on. There’s no divot to protect the paint and I’ve personally had some of these sights get beat up in short order. Most of the PPQ’s come with some really flimsy sights which have three white dots painted right on the trailing edge. All of the newer Walther ppq 9mm for sale pistols feature polygonal rifling, though I have seen an earlier M2 with more traditional land and groove rifling. The Q4 Tac comes standard with a threaded barrel, an adjustable rear sight and fiber optic front sight and is complete with an optic mount. Pull the slide back slightly then pull down on a tab just in front of the trigge


To me the polymer ones feel flimsy and I do question their long term reliability. I’m not a big fan of the captive polymer recoil spring. Nothing is perfect and the PPQ does have its share of ‘ehs,’ but it’s not a big list and it’s mostly matters of personal preference. There’s also a pistol called the ‘Creed’ which has similar frame ergonomics to the PPQ, but it is a completely different breed. The Sub-Compact holds 10 rounds in a flush fit mag but will accept any of the larger capacity mags. They can be had with 4″ or 5″ barrels (4.2″ for the .40 models and 4.25″ for the .45) or a 4.6″ threaded barre

Meine Werkzeuge
Namensräume

Varianten
Aktionen
Navigation
Werkzeuge